1640x990x40mm High Quality 250W 30V (60cells) Polycrystalline Solar Panel for Grid Tie or Off Grid Solar Power System
We also can supply ship by sea sevice for you if you need. When you want to ship by sea, please tell us the sea port at your city so that we can check the freight cost for you.
Solar panel is the heart of a solar power system. It transfers the sunshine into electricity to provide the power to the whole system. With the increasing popular of the green power, more and more solar power are application in our daily life, such as solar street light, solar charger, solar roof power system, etc. If you also want to join the team of using solar power, our solar panel is your right choice.
250W 30V solar panel is composed of 60 pieces 156x156mm polycrystalline solar cells in series. This type of module is certified according to CE, FCC and ROHS standard. It has characters of high efficiency. Long lifecycle, hail storm proof, and easy installation. 250W solar panel is the most popular for installation solar power system because of the suitable size and enough power.
Feature & Datasheet
>> High conversion efficiency
>> Positive power tolerance of 0~+3%, which means every solar panel power is higher than the rated power in the standard testing consditions.
>> Low degradation under light exposure.
>> Can withstand high wind-pressure, snow load and extreme temperature.
>> Passing IEC61215 2400Pa mechnical test.
|Maximum Power Voltage(Vmp)||31.02V|
|Maximum Power Current(Imp)||8.06A|
|Open Circuit Voltage(Voc)||36.99V|
|Short Circuit Current(Isc)||8.62A|
|Maximum System Voltage||1000V|
|Maximum Series Fuse Rating||15A|
|Pmax Temperature Coefficients(W/oC)||-0.450%|
|Voc Temperature Coefficients(V/oC)||
|Isc Temperature Coefficients(A/oC)||+0.040%|
|NOCT Nominal Operating Cell Temperature||47±2oC|
|Operating and Storage Temperature||-40 ~ +85oC|
|Standard Test Condition(STC)||1.000W/m2;AM 1.5;25+/-2oC|
Structure & Quality
1. Solar Panel Structure
>> Tempered glass: Low-iron tempered glass with 3.2mm symmetrical thickness and the transmittivity up to 90%
>> EVA: Adopting high quality EVA film with resisting ultraviolet radiation, antioxidant, and condensate material >> Solar Cell: Adopting high efficiency 156x156mm Polycrystalline Silicon solar cells, efficiency 18%-18.8% >> TPT Backsheet: Antioxidant and resisting humidity, high-blooeded isolation prevent binding hydroxylation >> Frame: Adopting imported Aluminium material with thickness are 25mm/35mm/40mm/45mm/50mm, it has enviromental, efficient,everlasting function, easy to installation and could resist atrocious weather. >> Juction Boxe: 250W IP65 waterproof grade with 4.0mm² Length 90mm, MC4 connector. 2. Quality and Safety >> 10-year warranty on product materials and processing technology >> Power output warranty: 90% output within 10 years; 80% output within 25 years. >> ISO 9001:2008(Quality Management System) certified factory >> IEC61215,IEC61730 ,MCS CEC certified products Mechanical Parameter
|Cell Type||Poly-crystalline 156×156mm|
|No. of Cells||60(6×10)|
|Front Glass||3.2mm high transmission,low iron,tempered glass|
|Frame||Anodized Aluminium Alloy|
|Junction box||IP65 Rated|
|Output cables||4.0mm² Length 90mm, MC4 connector|
1. Solar Panel Production Process
2. Production Equipment
4. Solar Panel Inspection
QC 1: Soar Cell Inspection:
All solar cells adopted in our module production will be 100% inspected twice. The first 100% inspection in made in cell manufacturing workshop. The second 100% inspection is made in incoming material inspection in module manufacturing workshop. Purpose of the twice 100% inspection is to mark sure every piece of solar cells is good quality and minimize the NG rate in module production.
QC 2: EL Test:
Each piece of modules in manufacturing workshop shall pass twice EL test. The first EL test is made before laminating. The second EL test is made after laminating. Purposes of the twice EL test is to detected defective cells in a single module and avoid leakage to our customers.
QC 3: Flash Test:
Each piece of modules will be tested in a closed flash test facility with simulated condition which is periodically calibrated by the authorized thirty parties. Each piece of modules will be classified to different grade according to the flash test result.
QC 4: Final Inspection:
Each piece of modules will be inspected before packing to ensure high quality.
The EL test, flash test and final inspection result of each module are recorded. The modules are traceable by the label stick on each module.
Validating that raw material and finished products meet expected long-term performance through accelerated environmental testing.
Solar panel is very precious products, we pack every of them is very carefully and professionally to keep it safety to our customers’ hands. Few customers complain the packaging problems to us. This is the proof of our professional and customer first sevice attitude.
Solar panels have already been widely application for our life. It transfers sunshine to electricity which is totally green power. It is clean and economical in the long run.
1. Residential, commercial or industrial roof tops solar power system
2. Solar water pump system for irrigation
3. Various application
If you need solar panels or solar power system design, please contact with us. We can help you to design your own unique solar power system and can supply all components of the system to you.
Leave a Review
We are proud to offer international shipping services that currently operate in over 200 countries and islands world wide. Nothing means more to us than bringing our customers great value and service. We will continue to grow to meet the needs of all our customers, delivering a service beyond all expectation anywhere in the world.
Packages from our warehouses will be shipped by ePacket or EMS depending on the weight and size of the product. Packages shipped from our US warehouse are shipped through USPS.
Yes. We provide free shipping to over 200 countries around the world. However, there are some locations we are unable to ship to. If you happen to be located in one of those countries we will contact you.
We are not responsible for any custom fees once the items have shipped. By purchasing our products, you consent that one or more packages may be shipped to you and may get custom fees when they arrive to your country.
|Location||*Estimated Shipping Time|
|United States||10-20 Business days|
|Canada, Europe||10-20 Business days|
|Australia, New Zealand||10-30 Business days|
|Central & South America||15-30 Business days|
Yes, you will receive an email once your order ships that contains your tracking information. If you haven’t received tracking info within 5 days, please contact us.
For some shipping companies, it takes 2-5 business days for the tracking information to update on the system. If your order was placed more than 5 business days ago and there is still no information on your tracking number, please contact us.
For logistical reasons, items in the same purchase will sometimes be sent in separate packages, even if you've specified combined shipping.
If you have any other questions, please contact us and we will do our best to help you out.
All orders can be cancelled until they are shipped. If your order has been paid and you need to make a change or cancel an order, you must contact us within 12 hours. Once the packaging and shipping process has started, it can no longer be cancelled.
Your satisfaction is our #1 priority. Therefore, if you’d like a refund you can request one no matter the reason.
If you did not receive the product within the guaranteed time( 45 days not including 2-5 day processing) you can request a refund or a reshipment.
If you received the wrong item you can request a refund or a reshipment.
If you do not want the product you’ve received you may request a refund but you must return the item at your expense and the item must be unused.
*You can submit refund requests within 15 days after the guaranteed period for delivery (45 days) has expired. You can do it by sending a message on Contact Us page
If you are approved for a refund, then your refund will be processed, and a credit will automatically be applied to your credit card or original method of payment, within 14 days.
If for any reason you would like to exchange your product, perhaps for a different size in clothing. You must contact us first and we will guide you through the steps.
Please do not send your purchase back to us unless we authorise you to do so.