Large Digital Wall Clock Modern Design Display 12/24 Hours Calendar Temperature Alarms Wall Watch In The Living Room Home Decor
1.Supports 16 groups snooze alarm, each group can be set from 1 to 59 minutes. 2.High brightness and 8-level brightness adjustment, fits anywhere, especially airport, stadium, library, school ect. Whatever indoor or outdoor.(not waterproof). 3.cycle display(time,calendar,temperature). 4.Size： (L×H×W):44×2×15(cm)/17.32×0.78×5.9(inch) 5.Material: Acrylic + LED Module + Circuit Board 6.The clock has 12/24 hour mode. 7. 30 meters remote control distance!(without obstacles) 8. Date display 9.Temperature: F/C display 10.Countdown: 0-365 days 11.The temperature error is 0.5℃ 12.Large LED Displaycan seemore than 50 meters 13.Stopwatch: 0 seconds to 23 hours 59 minutes 14.The time error is only 10 second one year 15.Net/Gross Weigh:0.8kg/1.2kg 16.Clock’s back up battery: CR2032 17.Remote controller battery: 2 AAAs All battery is not included according to the shipment law. Package: 1×Jumbo Led Clock 1×Charger 1×User Manual 1×Remote Control
Promotn !Large Modern 4 Digits Wall Clock Big LED Display Time Calendar Temperature Show InThe Living Room H
How to Use the ClockByRemote Controll
Exit to time display mode in any operation or setting.
POWER KEY :
Open/Close the clock.
NUMBER KEY 0-9:
Adjust number in operation or setting.
Show ℃/℉ in temperature display mode.
Show 12/24 hours mode.(One beep is 12 hours mode; three beep is 24 hours mode.)
Calendar setting, default format: 2000-01-01, Press “UP” key or “DOWN” key to adjust or number key 0-9 to adjust, press “MODE” key to exchange, press “RET” key after finish setting.
Time Setting steps : hours-minutes-seconds. Press “UP” key or “DOWN” key to adjust or number key 0-9 to adjust, press “MODE” key to exchange, press “RET” key after finish setting.
Alarm setting steps : AL01(01-16 groups alarm) →01(–/On)[Snooze alarm close/open]→00:00(Alarm time), Press “UP” key or “DOWN” key to adjust or number key 0-9 to adjust, press “MODE” key to exchange, press “RET” key after finish setting.
Count up, start with 00:00, press to start/pause, press “RET” key to exit.
Press the “CD SET” into the countdown setting.(Press “”MODE” key to exchange.)
steps : d0 00(1-999days)→00:00(hours and minutes)→:00(seconds)→–/on(memory or not)01(less than 1-99 seconds to remind)
Press to start/pause the countdown, press “RET” key to exit.
Press to set countdown prompt(mute mode/sound mode).
Fixed/Cycle display. Press “DISP” key to exchange. Steps : Fixed Calendar→Fixed Temperature→Cycle display→Fixed Time→……..
Set alarm on/off.
Set the colon on/off.
Test the light and the sound, press “RET” key to exit.
Mute key for the clock.
+ – KEY:
Brightness control. (if you can’t control the brightness, please press “DIM” key and retry. )
To check A1-A4 alarm.
To check A5-A16 alarm
1. Battery type: CR2032. This battery is used for backup, it can’t run the clock, please use the AC adapter. The clock can’t be connected directly to the cable.
2. If the clock is crashes, please cut off the power and take out of the battery CR2032, reconnect the power, the clock will reset automatically.